SSP Series
Product Overview
Technical Specifications
Salient Features
Application
Product Overview
- SSP Series (Side Suction ) pumps are Solid Moulded UHMW-PE pumps, Horizontal, Back pull-out, Single Volute Casing type, Single Stage, Centre line discharge, Side Suction Centrifugal Pumps.
- Side Suction Pumps Mostly designed for Slurry application, filter press Application, Caustic Scrubber etc where seal failures are frequent.
- Available in Metallic and Non Metallic Material of Construction.
Technical Specifications
| Capacity | Up to 100 m3/hr |
| Head | Up to 75 meters |
| Temperature | Max. up to 100°C (for Non Metallic), 200 deg C (For Metallic) |
| Maximum Working Pressure | 10 bar |
| Pump Speed | 1440rpm , 2900 rpm |
| Max. Sp. Gravity | 1.2-2.0 |
| Viscosity (upto) | 200 mPas (cP) |
| Suction & Discharge | ANSI B16.5–Class#150 |
| MOC (Metallic) | Cast Iron (CI), Carbon Steel (CS) WCB Grade, Stainless Steel (SS 316 / 316 L) CF8M / CF3M , Stainless Steel (SS 304 / 304 L) CF8 / CF3, |
| MOC (Non Metallic) | UHMW.PE |
Salient Features
- Due its Side Suction and Impeller vanes backside designed (opposite to typical end suction impeller) , pressure created on seal is very less and hence increases seal life.
- Even in gland packed designed, leakage from gland is zero during running condition.
- Best Suited for Caustic soda Plants , Lime Slurry , Filter Press, Caustic Scrubber etc.
- Available in Non-Metallic and Metallic Construction.
- Best Suited for Sulphate/Chlorides/Slurry type/Fitler press applications.
- Noise & Maintenance Free
- Oil Lubricated Bearings
- Can be used for negative suction also with seal type arrangements.
Application
- Mainly for handling Highly Corrosive & Abrasive Slurry (20 %)
- Effluent and Water Treatment Plants
- Handling Acids and Alkalis
- Chemicals, Dyes & Pigments Industries
- Organic/Inorganic Chemical Industries
- Fertilizer & Agro – Chemical Plants
- Gypsum Slurry, Lime Slurry based liquid
- Textile, Pulp and paper industries
- Caustic Soda & Chlorine Plants
- For Scrubbers, Filter press , Ejector systems etc
